MDS Battery for batteries
Your browser does not have JavaScript enabled so you will not be able to add to basket or checkout.
You can continue to browse the site however to order please call 0800 310 2100.
Shop by Department

UPS Batteries
CSB Batteries
Motorcycle Batteries from Yuasa
Car Batteries from Yuasa
Lithium Motorcycle Batteries from Shorai
Visit our CTEK Battery Charger Shop
Ansmann Products
Odyssey Racing Batteries
Yuasa Batteries
Sterling Power Shop
Sitemap Help Delivery Reviews Contact FAQ Industrial Mobile Site

CT-MXS5.0 CTEK MXS5.0 Charger

 In Stock

Delivery to UK Mainland
Buy now for despatch
Today (Monday)

Part Number:  CT-MXS5.0

74.99 (inc VAT)


Brand:   CTEK
Voltage:   12V
Output:   5 AmpsHelpMaximum output current of device.
Barcode: 7350009569750

CTEK Multi XS 5.0 12v Battery Charger

CTEK-The Smartest Battery Chargers in the World!

CTEK gives your battery a longer and more powerful life. Advanced fully automated Eight-step charger.


  • The Multi XS5.0 charges lead-acid batteries with an output of 0.8A for smaller (motorcycle) batteries or 5A for larger batteries i.e car batteries.

  • Temperature Compensation - now has built in automatic charge voltage compensation depending on ambient temperature, this will ensure ideal charging in extreme cold or hot weather conditions.

  • Suitable for charging Lead Acid, Wet, Maintenance Free, Gel, Absorbed Glass Mat (AGM) Calcium lead-acid batteries from 1.2Ah-110Ah.

  • Four charging modes.
      1, Motorcycle; Low current charging (0.8A) suitable for all 12v motorcycle batteries up to 30Ah.
      2, Car; Standard charging (4.0A) suitable for all 12v car, LCV, HGV etc batteries from 30Ah to 120Ah.
      3, AGM; Specialist charging for AGM batteries.
      4, Recond; Recovery mode suitable for deeply discharged vented batteries.

  • Eight Step fully automated charging cycle;
      1, Desulphation; uses pulses to restore sulphated batteries
      2, Soft start; Starting mode for charging cycle. To prepare the battery for bulk charging.
      3, Bulk; Main charge until 80% of the charge is complete. Carried out at a constant current.
      4, Absorption; Final part of the charge up to 100%. Carried out at a constant voltage.
      5, Analysis; Checks the self-discharge rate.
      6, Recond; This step is only used to restore deeply discharged batteries.
      7, Maintenance charge Float; Carried out at a constant voltage.
      8, Maintenance charge Pulse; uses pulses when necessary to keep the battery charge at the correct level.

  • This charger can be connected for months, perfect for seasonal vehicles.

  • Comes with two interchangeable connection leads, one with crocodile clips for occasional use, and one with eyelet terminals for permanent connection.

  • Low back current drain, low ripple and input voltage independent (220-240V).

  • Suitable for many snowmobiles, motorcycles, cars, caravans, motorhomes, motorboats and tractors

Your basket
is currently empty
Yuasa 12v 900mA Charger

(inc. VAT) 

Yuasa 12v 900mA Charger

Ctek MXS7.0 Battery Charger

(inc. VAT) 

Ctek MXS7.0 Battery Charger

CTEK Multi XS3.8 12v Battery Charger

(inc. VAT) 

CTEK Multi XS3.8 12v Battery Charger
UPS Batteries - Whole Range In Stock UPS Batteries - Whole Range In Stock

Yuasa Motorcycle Batteries Cheap Motorcycle Batteries

Cheap Mobility Scooter Batteries Cheap Mobility Scooter Batteries
© MDS Battery